This is a 25.6V 54Ah rechargeable lithium battery pack assembled from 32700 cells in an eight-series, nine-parallel layout and sealed inside an aluminum alloy column. It stores what the panel collects during daylight and releases it into the lamp after dark, so the whole design follows lighting duty rather than traction or inverter duty.

The people who buy it build or run outdoor lighting: solar street light manufacturers, billboard and signage lighting suppliers, and integrators working where there is no grid connection. They are buying a lithium battery for a fixture that will be visited rarely, and the questions that decide the purchase are weather sealing and service interval.

Most installations use it in place of a 24V lead-acid block. Nominal voltage stays in the same class, the pack is far lighter to lift onto a pole, and there is no electrolyte to top up. The controller normally has to be re-set for a lithium charge profile before the first night.

In service the pack sits between the panel, the controller and the lamp: charged while the array is producing, discharged overnight, and watched by a BMS that disconnects the load before the cells are drained flat.

Sealed aluminum column rated IP67 — dust-tight and protected against temporary immersion, so the housing is the weather barrier and no second enclosure is needed. Daily-cycle durability — capacity is rated to hold at 80% of its initial value across a long cycle count, so replacement follows years of nights rather than seasons. Discharge headroom for lighting loads — the continuous and peak ratings are set for lamp start-up and dimming schedules rather than for steady traction duty. Built-in BMS — the protection board sits inside the pack, so the battery looks after its own cells instead of relying on an add-on device. LiFePO4 battery chemistry — lithium iron phosphate cells are chosen for thermal stability and long calendar life, which matters for a pack that lives outdoors all year. Wide operating window — discharging into a cold night and charging from a panel in a hot enclosure both stay inside the rated range. Low self-discharge and high charge efficiency — useful when the pack sits at partial charge through a low-sun season or waits in a warehouse before installation. Easy to handle on site — a pack one person can lift onto a pole, and a much lower load on the bracket than the lead-acid block it replaces.



| Stage | What happens |
| Materials mixing | Fully automatic feeding system, high precision and fully enclosed |
| Coating | High-precision constant-temperature coating machine |
| Electrode rolling | Precision automatic roller machine |
| Electrode slitting | Automatic continuous slitting machine |
| Winding | Automatic winding machine |
| Into shell | Cells placed into the case before filling |
| Tab welding and beading | Automatic welding machine |
| Electrolyte filling | Automatic bell-type injection machine |
| Laser welding | Automatic laser welding |
| Formation and capacity sorting | Needle-bed type charging cabinet |
| Cycle test | Every cell tested for three cycles |
| OQC | 100% inspection of appearance, voltage, capacity, resistance and size |



The pack is built as a sealed aluminum column with capped ends and the cable leaving the top. Aluminum does two jobs here: it carries the structure of the pack and it spreads cell heat into the shell, so there is no plastic case sitting inside a metal box.

IP67 is the working number — dust-tight, and protected against temporary immersion. In lighting terms that means driven rain, road spray and the occasional flooded pole base. The two places worth a look after installation are the end seals and the cable exit.

The terminal is a connector, and it is the part we build to your drawing. Connector type, cable length and the direction the lead exits the housing are fixed at that stage, which is why a custom lithium battery order usually starts with a mating-connector photo or a simple sketch rather than a part number alone.

The column can stand vertically on a bracket or lie horizontally inside a lamp housing, and the flat capped ends give a face to clamp against. Settle the orientation before the cable exit is fixed, so the lead points where water will not run into it.

Nothing inside is serviceable in the field. Treat the pack as a sealed unit: if a string fails, the pack is replaced rather than opened, and the BMS is not intended to be accessed on site.









| Item | Specification |
|---|---|
| Nominal Voltage | 25.6V |
| Nominal Capacity | 54Ah, standard discharge @0.2C after standard charge |
| Dimensions & Weight | 110 x 142 x 650 mm, approx. 11 kg |
| Cycle Life | ≥2000 times, ≥80% of the initial capacity |
| Housing & IP Rating | Aluminum alloy, IP67 |
| Terminal Type | Connector / customized |
| Cut-off Voltage | Charge 29.2V, discharge 20V |
| Charge Current | 10A standard, 20A maximum |
| Discharge Current | 10A standard, 20A maximum continuous, 30A peak ≤5s |
| Operating Temperature | Charge 0 °C to 45 °C, discharge -20 °C to 60 °C |
| Storage Temperature | -20 °C to 25 °C for 12 months, -20 °C to 35 °C for 3 months, -20 °C to 45 °C for 1 month |
| Protection | Over charge, over discharge, over current, over voltage, short circuit, cell protection, temperature protection |









Topwell Power is a lithium battery manufacturer, not a trading house. Our range runs from compact packs to large storage systems, so buyers can consolidate several lines behind one specification standard and one set of shipping documents. OEM and private-label work is routine: your label, case marking, terminal choice, capacity and packing configuration. Capacities and enclosures are customised per project, samples are available before a production run, and shipments go out with the transport documentation freight forwarders ask for. Send your target specification and volume, and we will confirm lead time, packing and pricing for that order.





Yichun Topwell Power Co., Ltd (Trademark:TWE) established in 2002, is a high-tech enterprise focusing on the R&D, production and sales of lithium polymer batteries, lithium ion batteries, lithium iron phosphate batteries, and lithium thionyl chloride batteries. Products are widely used in consumer electronics, Internet of Things, smart home, medical, vehicle, home and outdoor energy storage, and have obtained CE, RoHS, Reach, UN38.3, IEC62133, CB, UL, MSDS certifications, etc.
Topwell moves on by providing reliable, efficient and intelligent battery solutions to meet different energy needs. We have efficient engineering, production and quality management teams. From raw material procurement, to production, testing, sales and after-sales service, all steps have been controlled by a strict quality management system. Our factory has passed ISO9001, IS014001, BISI certification, SGS, Intertek audit. With the advantages in price, quality and service, we have established long-term and stable cooperative relationships with many well-known brands. Topwell always attached the great importance to the long term cooperation with customers. No matter the order is big or small, we do our best to support you the highest quality with favorable price. We believe that Topwell Power can be your best battery supplier!